Showing posts with label Cisco CCNA 1 Networking Fundamentals tutorials. Show all posts
Showing posts with label Cisco CCNA 1 Networking Fundamentals tutorials. Show all posts
Wednesday, 20 July 2016
Sunday, 2 February 2014
10 TIPS TO HELP IMPROVE YOUR WIRELESS NETWORK
Hi Everyone!!!.
Here I leave a few tips to improve your wireless network, they are short tips that can implement in your home or business
If
the Windows operating system ever notifies you about a weak Wi-Fi
signal, it probably means that your connection isn't as fast or as
reliable as it could be. Worse, you might lose your connection entirely
in some parts of your home. If you want to boost the signal for your
wireless network (WLAN), try some of these tips for extending your
wireless range and improving your wireless network speed and
performance.
1. Position your wireless router, modem router, or access point in a central location
When possible, place your wireless router, wireless modem router (a DSL or cable modem with a built-in wireless router), or wireless access point (WAP) in
a central location in your home. If your wireless router, modem router,
or access point is against an outside wall of your home, the signal
will be weak on the other side of your home. If your router is on the
first floor and your PC or laptop is on the second floor, place the
router high on a shelf in the room where it is located. Don't worry if
you can't move your wireless router, because there are many other ways
to improve your connection.

2. Move the router off the floor and away from walls and metal objects (such as metal file cabinets)
Metal
objects, walls, and floors will interfere with your router's wireless
signals. The closer your router is to these obstructions, the more
severe the interference, and the weaker your connection will be.
3. Replace your router's antenna
The
antennas supplied with your router are designed to be omnidirectional,
meaning that they broadcast in all directions around the router. If your
router is near an outside wall, half of the wireless signals will be
sent outside your home, and much of your router's power will be wasted.
Most routers don't allow you to increase the power output, but you can
make better use of the power. If your router’s antenna is removable, you
can upgrade to a high-gain antenna that focuses the wireless signals in
only one direction. You can even aim the signal in the direction you
need it most.

4. Replace your laptop's wireless PC card-based network adapter
Laptops
with built-in wireless networking capability typically have excellent
antennas and don't need to have their network adapters upgraded. These
tips are for laptops that do not have built-in wireless networking.
Wireless
network signals must be sent both to and from your computer. Sometimes
your router can broadcast strongly enough to reach your computer, but
your computer can't send signals back to your router. To improve this,
replace your laptop's PC card-based wireless network adapter with a USB
wireless network adapter that uses an external antenna.

5. Add a wireless repeater
Wireless
repeaters extend your wireless network range without requiring you to
add any wiring. Just place the wireless repeater halfway between your
wireless router, modem router, or access point and your computer, and
you can get an instant boost to your wireless signal strength.
6. Change your wireless channel
Wireless
routers can broadcast on several different channels, similar to the way
radio stations use different channels. In the United States and Canada,
these channels are 1, 6, and 11. Just as you'll sometimes hear
interference on one radio station while another is perfectly clear,
sometimes one wireless channel is clearer than others. Try changing your
wireless router's channel through your router's configuration page to
see if your signal strength improves. You don't need to change your
computer's configuration, because it can automatically detect the new
channel.
7. Reduce wireless interference
The
most common wireless technology, 802.11g (wireless-G), operates at a
frequency of 2.4 gigahertz (GHz). Many cordless phones, microwave ovens,
baby monitors, garage door openers, and other wireless electronics also
use this frequency. If you use these wireless devices in your home,
your computer might not be able to "hear" your router over the noise
coming from them.
If
your network uses wireless-G, you can quiet the noise by avoiding
wireless electronics that use the 2.4 GHz frequency. Instead, look for
cordless phones and other devices that use the 5.8 GHz or 900 megahertz
(MHz) frequencies. Because 802.11n (wireless-N) operates at both 2.4 GHz
and the less frequently used 5.0 GHz frequency, you may experience less
interference on your network if you use this technology.
8. Update your firmware or your network adapter driver
Router
manufacturers regularly make free improvements to their routers.
Sometimes, these improvements increase performance. To get the latest
firmware updates for your Cisco router, visit Cisco.com.
Similarly,
network adapter vendors occasionally update the software that Windows
uses to communicate with your network adapter, known as the driver.
These updates typically improve performance and reliability.
9. Pick equipment from a single vendor
Although
a Cisco router will work with a D-Link network adapter, you often get
better performance if you pick a router and network adapter from the
same vendor. Some vendors offer a performance boost of up to twice the
performance when you choose their hardware (like their USB wireless
network adapters).
If speeding up your connection is important to you, consider the next tip—upgrading your wireless technology.
10. Upgrade 802.11a, 802.11b, and 802.11g devices to 802.11n
Although
wireless-G (802.11g) may be the most common type of wireless network,
wireless-N (802.11n) is at least twice as fast and it has better range
and stability. Wireless-N is backward-compatible with 802.11a, 802.11b,
and 802.11g, so you can still use any existing wireless equipment that
you have—though you won’t see much improvement in performance until you
upgrade your computer or network adapter to wireless-G, too.
If
you're using wireless-B or wireless-G and you're unhappy with your
network’s speed and performance, consider replacing your router and
network adapters with wireless-N equipment. If you're buying new
equipment, definitely choose wireless-N. Cisco Wireless-N routers, for
example, are powerful, secure, and simple to set up.
I hope you consider this document useful,
Here I leave a few tips to improve your wireless network, they are short tips that can implement in your home or business



Friday, 24 January 2014
How to setup Inbound/Outbound firewall
How to setup Inbound/Outbound firewall rules on NETGEAR Modem router/gateways
Symptoms:
- Cannot connect or access LAN devices or applications from the Internet (i.e.: FTP server, HTTP server, Podcast server, etc...)
- Cannot play online games through NETGEAR Modem Routers
- The NETGEAR firewall prevented certain applications to work correctly over the Internet
Resolutions:
By default, the NETGEAR Firewall rules will block and prevent any unauthorized access to your Local Area Network (LAN). Remote access to the LAN devices or applications will only be possible after an inbound or outbound firewall rule is added to the router/gateway. Inbound firewall rules are set of rules that would allow or permit access to the LAN services from the Internet -- the default rule blocks all incoming service requests. On the other hand, Outbound firewall rules would prevent or deny access to the Internet from the LAN devices -- the default rule allows all outgoing traffic.
By default, the NETGEAR Firewall rules will block and prevent any unauthorized access to your Local Area Network (LAN). Remote access to the LAN devices or applications will only be possible after an inbound or outbound firewall rule is added to the router/gateway. Inbound firewall rules are set of rules that would allow or permit access to the LAN services from the Internet -- the default rule blocks all incoming service requests. On the other hand, Outbound firewall rules would prevent or deny access to the Internet from the LAN devices -- the default rule allows all outgoing traffic.
The steps below will show you how to configure inbound/outbound firewall rules:
1. Open Internet browser and access http://192.168.0.1 or http://www.routerlogin.com.2. Enter admin for username and password for password. If you have changed the default password, please enter your customized password when prompted.3. On the left panel under Security (Content Filtering, for older devices) , click Firewall Rules.4. Click the Add button under the type of rule (Outbound or Inbound) that you would like to add.5. Select the desired Service from the list. If necessary, you can define a customized service. To add a new customized Service, follow these steps:
- On the left panel, under Security (Content Filtering for older models), click Services.
- Click the Add Custom Service button.
- Create a Name for the new service
- Select the Type of protocol that the service will be using.
- Enter the Starting port and Ending port
- Click Apply to finish adding the new custom service.
6. Under Action, select the appropriate action for packets covered for this rule.
- Note: To define the Schedule used in these selections, use the "Schedule" option listed on the Security or Content Filteringsection.
7. Under the Send to LAN server field, enter the IP address of the PC or Server on your LAN which will receive the inbound or outbound traffic covered by this rule.8. Select an option for WAN Users. This setting determine which packets are covered by the rule, based on their source (WAN) IP address. Here are the options:
- Any - All IP addresses are covered by this rule
- Address range - If this option is selected, you must enter the "Start" and "Finish" fields
- Single address - Enter the required address in the "Start" fields.
9. Select an option under Log. This determines whether packets covered by this rule are logged. Select the desired action.
- Always - always log traffic considered by this rule, whether it matches or not. (This is useful when debugging your rules.)
- Never - never log traffic considered by this rule, whether it matches or not.
- Match - Log traffic only it matches this rule. (The action is determined by this rule.)
- Not Match - Log traffic which is considered by this rule, but does not match (The action is NOT determined by this rule.)
10. Click on Apply button.
> Netgear MBR624GU, DGND3300, DGN2000, DG834G and DG834N.
Wednesday, 25 December 2013
Top Eight Security Tips for Windows 8
Microsoft is releasing Windows 8, the newest version of the Windows
operating system, for general availability on October 26. Although
Windows 8 offers enhanced security features, it also raises new security
concerns because of changes to the graphical user interface and a new
online app store. We’re offering the following eight security tips to
help you stay secure as you move to Windows 8.
You should still run a full security suite for superior filtering and centralized management and reporting. While Microsoft has included a minimalist antivirus and firewall, most organizations will still require commercial-grade security. And of course, all the old security rules also apply with Window 8. It’s still a bad idea to allow automatic log-on. Above all, remain vigilant.
1. Exercise caution with apps for the new Windows 8 user interface (formerly known as Metro)
Some familiar applications have been completely re-written for the new Windows 8 UI. As a result they may work completely differently, despite looking the same. For example, an application historically delivered as an executable could now be entirely web-based. This impacts the visibility your existing security and monitoring tools have into these apps.2. Use the Windows 8 style UI version of Internet Explorer
By default, plugins are disabled, blocking a major target for exploit kits and Blackhole attacks.3. Make sure your security vendor can flag malicious Windows 8 UI apps
Windows 8 UI apps have important differences from regular applications, and your security product should be able to distinguish the two. The security product should correctly flag malicious or modified Windows 8 UI applications (tampered, modified, invalid license).4. Disable hard drive encryption hibernation
Hard drive encryption is a cornerstone of data protection. If possible, disable the hibernation option in Windows 8 through group policy, as it doesn’t always work well with encryption.5. Make sure your hardware carries the “Designed for Windows 8” logo
To carry this logo, hardware must be UEFI compliant. This means you can take advantage of the secure boot functionality available in Windows 8. Secure boot is designed to ensure the pre-OS environment is secure in order to minimize the risk from boot loader attacks.6. Make application control a priority
The Windows 8 app store makes application control increasingly important for both malware prevention and productivity control. While the Windows Store will be secured, history shows that malicious apps are likely to slip through. Disable the use of apps that aren’t relevant to your organization.7. Treat Windows RT (ARM) devices like any other mobile devices
Make sure you impose the same security levels on Windows RT devices as all others. You should have the ability to control, track, remote wipe and encrypt them.8. Review application permissions in the Windows Store
Applications in the Windows Store must list any resources they require. Carefully review these permissions in the details tab as some will grant access by default to your location information, calendar, etc.You should still run a full security suite for superior filtering and centralized management and reporting. While Microsoft has included a minimalist antivirus and firewall, most organizations will still require commercial-grade security. And of course, all the old security rules also apply with Window 8. It’s still a bad idea to allow automatic log-on. Above all, remain vigilant.
Monday, 25 November 2013
CCNA FUNDAMENTALS TUTORIALS
Subscribe to:
Posts (Atom)
Subscribe to email feed



