Wireless Router Configuration

Wireless Router Configuration.... Step by Step Tutorial

January 4, 2013 at 1:29am

1. Type 192.168.0.1 or the IP address provided at the bottom of the router in the address bar and press ENTER. Then type default username and password provided at the bottom of the router. Now click on QUICK SETUP menu, the below screen appears. Click NEXT.
2. Now select DYNAMIC IP and click NEXT.
3. In MAC clone option, select second option i.e. “No”, then click next.
4. In the Wireless setup, ‘Enable ’the Wireless Radio, select the Network Name or SSID (this name is displayed in your Laptop, Phones, etc.), select your region or country, set the channel option to AUTO, Mode to 11bgn mixed, channel width auto. Then in wireless security option, select WPA-Personal/WPA2-Personal. Type the password (As you want) and click next.
5. After the above process, the setup is complete. Now click on REBOOT to reboot the router.
6. Your WiFi router is now configured.

Note: the above example has been set with a TP-Link WiFi router as a sample...In most wireless routers the steps are same. If it doesn't help you ask us for a complete pictorial step by step information.
Alternatively, you can visit us at our Maitighar office and we would configure it for you for FREE.